Product Name: Ammonium sulfate
Catalogue Codes: SLA2851, SLA2011, SLA1168, SLA2674
TSCA: TSCA 8(b) inventory: Ammonium sulfate
CI#: Not available.
Synonym: Sulfluric Acid, Diammonium Salt
Chemical Name: Ammonium Sulfate
Chemical Formula: (NH4)2SO4
3. Hazards Identification
Potential Acute Health Effects: Hazardous in case of skin contact (irritant), of eye contact (irritant), of ingestion, of inhalation.
Potential Chronic Health Effects:
CARCINOGENIC EFFECTS: Not available. MUTAGENIC EFFECTS: Not available. TERATOGENIC EFFECTS: Not available.
DEVELOPMENTAL TOXICITY: Not available. Repeated or prolonged exposure is not known to aggravate medical condition.
Section 4. First Aid Measures
Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention.
In case of contact, immediately flush skin with plenty of water. Cover the irritated skin with an emollient. Remove contaminated clothing and shoes. Cold water may be used.Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention.
Serious Skin Contact:
Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek medical attention.
If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Serious Inhalation: Not available.
Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention if symptoms appear.
Serious Ingestion: Not available.
- Fire and Explosion Data
Flammability of the Product: May be combustible at high temperature.
Auto-Ignition Temperature: Not available.
Flash Points: CLOSED CUP: Higher than 93.3°C (200°F).
Flammable Limits: Not available.
Products of Combustion: Not available.
Fire Hazards in Presence of Various Substances:
Flammable in presence of oxidizing materials. Slightly flammable to flammable in presence of heat.
Explosion Hazards in Presence of Various Substances:
Risks of explosion of the product in presence of mechanical impact: Not available. Risks of explosion of the product in presence of static discharge: Not available. Explosive in presence of oxidizing materials.
Fire Fighting Media and Instructions:
SMALL FIRE: Use DRY chemical powder. LARGE FIRE: Use water spray, fog or foam. Do not use water jet.
Special Remarks on Fire Hazards:
A mixture of ammonium sulfate and potassium chlorate decomposes with incandescence when heated. When a little ammonium sulfate is added to fused potassium nitrite, a vigorous reaction occurs attended by flame. Non combustible. This substance itself does not burn, but may decompose upon heating to produce corrosive and/or toxic fumes.
Special Remarks on Explosion Hazards:
If accidently mixed with oxidizers like potassium chlorate, potassium nitrate or potassium nitrite, there is an explosion hazard during fire. A mixture of ammonium sulfate and ammonium nitrate can easily be exploded by potassium or sodium-potassium alloy.
- Accidental Release Measures
Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the
contaminated surface and allow to evacuate through the sanitary system.
- Handling and Storage
Keep away from heat. Keep away from sources of ignition. Do not ingest. Do not breathe dust. Wear suitable protective clothing. In case of insufficient ventilation, wear suitable respiratory equipment. If ingested, seek medical advice immediately and show the container or the label. Avoid contact with skin and eyes. Keep away from incompatibles such as oxidizing agents.
Storage: Keep container tightly closed. Keep container in a cool, well-ventilated area.
- Exposure Controls/Personal Protection
Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.
Personal Protection in Case of a Large Spill:
Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product.
Exposure Limits: Not available.
- Physical and Chemical Properties
Physical state and appearance: Solid. (Crystals solid.)
Taste: Not available.
Molecular Weight: 132.14 g/mole
Color: brownish gray to white
pH (1% soln/water): Not available.
Boiling Point: Not available.
Melting Point: 280°C (536°F)
Critical Temperature: Not available.
Specific Gravity: 1.77 (Water = 1)
Vapor Pressure: Not applicable.
Vapor Density: Not available.
Volatility: Not available.
Odor Threshold: Not available.
Water/Oil Dist. Coeff.: Not available.
Ionicity (in Water): Not available.
Dispersion Properties: See solubility in water.
Soluble in cold water. Insoluble in acetone.
- Stability and Reactivity Data
Stability: The product is stable.
Instability Temperature: Not available.
Conditions of Instability: Excess heat, incompatible materials.
Incompatibility with various substances:
Highly reactive with oxidizing agents. Reactive with alkalis.
Corrosivity: Non-corrosive in presence of glass.
Special Remarks on Reactivity:
Incompatible with the following: Potassium + ammonium nitrate, potassium chlorate, potassium nitrate, potassium nitrite, sodium hypochlorite, sodium/potassium alloy + ammonium nitrate. Substance should not contact either zinc or copper bearing materials. Reacts with alkali to release ammonia.
Special Remarks on Corrosivity: Not available.
Polymerization: Will not occur.
- Toxicological Information
Routes of Entry: Inhalation. Ingestion.
Toxicity to Animals: Acute oral toxicity (LD50): 640 mg/kg [Mouse].
Chronic Effects on Humans: Not available.
Other Toxic Effects on Humans: Hazardous in case of skin contact (irritant), of ingestion, of inhalation.
Special Remarks on Toxicity to Animals:
Lowest Published Lethal Dose/Conc: LDL [Domestic animal – Goat, Sheep) – Route: Oral; Dose: 3500 mg/kg
Special Remarks on Chronic Effects on Humans:
It may be a possible mutagen. It has been tested for mutagenicity, but so far tests have been inconclusive or test information has not been made available.
Special Remarks on other Toxic Effects on Humans:
Acute Potential Health Effects: Skin: Causes skin irritation. Eyes: Causes eye irritation. Inhalation: May cause respiratory tract irritation. Ingestion: When ingested, its osmolarity can draw water from the body into the bowel, acting as a laxative. However,
if enough is absorbed systemically it may produce Ammonia poisoning. Symptoms may include gastrointestinal (digestive) tract irritation with nausea, vomiting, hypermotility, diarrhea. May also affect eyes (Mydriasis), behavior/central nervous system (somnolence, tremor, convulsions, muscle contraction or spasticity), and respiratory system (respiratory stimulation, dyspnea).
Also, with ingestion of large doses of Ammonium Sulfate arises the possibility of sufficient absorption to produce diuresis, an excessive discharge of urine, and kidney damage (renal tubular disorder, abnormal renal function). Chronic Potential Health Effects: One Russian occupational standard study discussed chronic exposure effects which may include cardiac contraction, neurotoxicity, and hypertension. This has not been confirmed in other ammonium sulfate exposed workers.
- Ecological Information
Ecotoxicity: Not available.
BOD5 and COD: Not available.
Products of Biodegradation:
Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise.
Toxicity of the Products of Biodegradation: The product itself and its products of degradation are not toxic.
Special Remarks on the Products of Biodegradation: Not available.
- Disposal Considerations
Waste must be disposed of in accordance with federal, state and local environmental control regulations.
- Transport Information
DOT Classification: Not a DOT controlled material
Identification: Not applicable.
Special Provisions for Transport: Not applicable.
- Other Regulatory Information
Other Regulations: EINECS: This product is on the European Inventory of Existing Commercial Chemical Substances
DSCL (EEC): R16- Explosive when mixed with oxidizing substances. R36/38- Irritating to eyes and skin. S24/25- Avoid contact with skin and eyes.
Gloves. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Splash goggles.
- Other Information
References: Not available.
Other Special Considerations: Not available.
EXCLUSION OF LIABILITY
All information and instructions provided in this Material Safety Data Sheet in respect of the substance is given solely in terms of the provisions of the Occupational Health and Safety Act No 85 of 1993 and Regulations (“the Act”), is based on scientific and technical knowledge as at the date indicated on this MS Material Safety Data Sheet and is presented in good faith to be correct.
The information and instructions provided in this MSDS apply only to the substance in its present form and not to any formulation or mix, in which event it is the sole responsibility of the user of the substance as formulated and/or mixed to investigate and establish any danger which may arise out of its use, wherever such user may be situated.
It is the sole responsibility of the person in receipt of this Material Safety Data Sheet wherever such recipient may be situated, to ensure that the information provided is communicated to and understood by any person who may come in contact with the substance in any place and in any manner whatsoever. If such recipient produces formulations or mixes using the substance, then it is such recipient’s sole responsibility to comply with the provisions of the Act in respect of the provision of the necessary Material Safety Data Sheet, or to comply with any other applicable legislation.